Material fabrication
All Items
-
Analysis of Neutron Radiation Absorption Capacity of Coir Fiber Composite Board as A Neutron Radiation Shield
Abstract views: 782 times |
Downloads: 260 times |
DOI:
https://doi.org/10.21771/jrtppi.2025.v16.no1.p1-8
-
Assessing the Challenges and Opportunities of Collaborative Governance in Multi-Stakeholder Policy Environments
Abstract views: 813 times |
Downloads: 470 times |
DOI:
https://doi.org/10.21771/jrtppi.2025.v16.no1.p32-40
-
Bending Test Analysis of Hybrid GLARE Material Using Nano Adhesive CNT and Aluminum Powder Reinforcement
Abstract views: 256 times |
Downloads: 45 times |
DOI:
https://doi.org/10.21771/jrtppi.2025.v16.no2.p149-157
-
Effect Of Nano Reinforced Adhesive AL Powder And Cnt On Bending Strength Of Hybrid Laminate Structure AL - CFRP
Abstract views: 350 times |
Downloads: 195 times |
DOI:
https://doi.org/10.21771/jrtppi.2025.v16.no1.p51-60
-
Hazard Identification, Risk Assessment and Control (HIRAC) on Water Solid Contents Determination at Environmental Chemistry Laboratory of President University
Abstract views: 833 times |
Downloads: 641 times |
DOI:
https://doi.org/10.21771/jrtppi.2024.v15.no2.p94-102
-
Human-Centered Ergonomic Design in Industry 5.0: Enhancing Productivity and Worker Wellbeing
Abstract views: 1367 times |
Downloads: 1149 times |
DOI:
https://doi.org/10.21771/jrtppi.2025.v16.no1.p41-50
-
Study of The Influence of Extract Cocoa Pods (Theobroma Cacao) as a Preservative Ingredient on Mahoni Woods (Swietenia Mahogany) Through Cold Soaking on Mechanical Properties
Abstract views: 495 times |
Downloads: 262 times |
DOI:
https://doi.org/10.21771/jrtppi.2024.v15.no2.p50-62
-
The Effect of Kaolin Addition as a Binder in Making Pellets Iron Concentrate
Abstract views: 543 times |
Downloads: 217 times |
DOI:
https://doi.org/10.21771/jrtppi.2024.v15.no2.p63-73
-
Utilization of Industrial Waste (Bottom Ash) as an Alternative Material in Paving Block Manufacturing
Abstract views: 922 times |
Downloads: 445 times |
DOI:
https://doi.org/10.21771/jrtppi.2025.v16.no1.p8-15

